Black Velvet Trim Gothic Jacket

In stock

How To Measure Kilt Size

Waist Size

Waist measurements should be taken at the navel level and the measurement must be tight. This is usually taken 2 inches higher than your hip bone or higher from where your trousers are usually worn.

Hip or Seat Size (Optional)

Please put your feet together, then measure the broadest part of your hips. Ensure that your pockets are empty! It’s not necessary

Fell Measurements (Optional)

This measurement should be halfway between the waist and seat (bottom). The fell is the distance from the waistline to the hip measurement line. It’s not necessary

Kilt Length

Please kneel on the ground, place the tape on the floor then measure up to your belly button. Remember that kilts shouldn’t be worn too long!
Normally, your kilt length will correspond with the following guides. If it's significantly different, try taking the measurements again. If it's slightly different, then it could be down to preference or body shape. See our notes below for more info.

Height 5' 6" to 5' 7" = 22" to 22.5" kilt length
Height 5' 8 to 5' 9" = 23" to 23.5" kilt length
Height 5' 10" to 5' 11" = 24" to 24.5" kilt length
Height 6' to 6' 2" = 24.5" to 25.5" kilt length
Height 6' 3" to 6" 4" = 26" to 26.5" kilt length
Height 6' 5" to 6' 7" = 27" to 27.5" kilt length

Jacket Measuring Guides


By wrapping the measuring tape around the neck, put about one inch above from shoulders. This may also coincide with the bottom of your Adam's apple. put  a finger between the tape and your neck so it do not feels tight or loose. make sure the tape is at level and not bent or at an angel note down the neck size.


To measure the shoulder width Measure from one shoulder edge to the other from the back. These points are where the shoulder meets the arm. Run the measuring tape from one point to the other shoulder from above the shoulders about an inch below the neck.

  1. CHEST

For Jacket measurement this is an important part. Measure around the widest part of your chest, place the tape close under the arms and make sure the tape is level flat across the front and back. while in relax position note down the chest measurement and you are good to go.


To measure waist size for the jacket, wrap the tape around the widest part of your stomach, this is usually across belly-button. Do not breathe in or out, keeping yourself normal & relax take waist measurement.


To measure Sleeve length put one end of the measuring tape at upper shoulder edge where shoulder meets the arm, run the tape along outside of your arm down to the wrist. make sure that arm is bent to ensure the proper movement.


Back length is the measurement from the base of center Back Neck Point or cervical to the natural waistline level across belly button.


Measure your body height standing straight against the wall.




Maximum 500 characters


Secured and trusted checkout with

Black Velvet Trim Steampunk Vampire Goth Jacket is designed using high quality fabrics. The front of the jacket is made up of high quality Black velvet trims with 9 decorated buttons on either side of the jacket. It features hook fastening which are given under the jacket and are not apparent while fastening. There are two Flap pockets on the side of the jacket and each flap is decorated with Velvet flap and buttons used on the front. The jacket is long sleeve and has amazingly designed cuffs. The cuffs are upward trimmed and made up of Velvet material. There are three antique buttons used on each cuff making it look amazing. Features
  • Black Velvet Trim
  • Antique Buttons
  • Flap Pockets
  • Stylish Cuffs


Now lets talk about the design of this amazingly designed Varsity Jacket which makes it stylish and standout among all other jackets.


The front of the jacket is designed with Black velvet at the front with nine decorated buttons on each side. It features hook closure which are given inside the jacket and are not apparent while wearing it up. It is a pure Steampunk Vampire style with stylish cuts. There are two Flap pockets on the front of the jacket. Each Flap is made up of black Velvet as used on the front patch along with decorated buttons on each flap. Normally, the front side of jacket hangs little upward from the knees still its up to the choice of wearer.  

Sleeves, Collar and Back

This jacket features long sleeves with amazing Cuff style. The cuffs are turned upward made up of black velvet as used on the front of the jacket and each Cuff has three decorated buttons which matches the front design. The collar are small without much additional or styling. The back of the jacket has a short cut which is given for comfortable wearing of the jacket. On the back there is also a black velvet strap with two decorative buttons to complement the other designing.
0% of 100
Write Your Own Review
You're reviewing:Black Velvet Trim Gothic Jacket
Your Rating
Hosted By Magento Clusters